American Dryer
  American Specialties, Inc.
  Bobrick
  Bradely Hand Dryers
  dyson
 
  Saniflow Hand Dryers
  Veltia Hand Dryers
  World Dryer
  Home > Resources > Hand Dryer Technology  
     
 

Hand Dryer Technology

 
 

Hand dryer technology increases usability, efficiency, and sustainability of the modern restroom.  Many new hand dryers are automatic and touchless, activated by motion sensors. Some are smaller and able to meet ADA requirements without having to recess the hand dryer into the wall.  Other hand dyers can now automatically detect 110, 208, or 220 voltages, thereby adjusting itself to the appropriate voltage and thus making it easier to replace an existing installation.  The construction of the dryers' plastic covers are made strong enough to support a full size truck and still run perfectly.  Adjustable variable speed motors allow the installer to determine noise level vs. air speed.  Low wattage environmentally friendly dryers without heating elements dry hands in 10 to 15 seconds.

Until recently, hand dryers mounted on the wall about chest height, dry hands by blowing heated air from one direction while the user moves and rubs hands together to assist in the drying cycle.  Now, there are dryers that utilize 300 separate nozzles to massage the water from the operator's hands at 125 mph without the use of hand movement.  These new hand dryers work by the user placing their hands into the dryer and holding them still until the end of the cycle.  The plastic used for the interior of these units are imbedded with Microban®, an antimicrobial agent which protects the product itself.  Using this type of dryer will feel like a massage to the hands.  The unit mounts upright on the wall, just below waist level, and dries hands in 10 to 15 seconds while using 80% less energy than conventional hand dryers.  Conventional hand dryers use up to 2200 watts of power for 30 to 45 seconds.  These new dryers use less than 1800 watts of power for as little as 10 seconds.  Because the dryer runs for less time and uses less power, energy is saved each time the dryer is used.  Additionally, excess water is captured inside the unit and evaporates naturally keeping water from being dripped onto the floor.  These hand dryers combine the best technologies with elegance and efficiency.

Hand dryer technology has been used to create a dryer that uses only 540 watts of power and will dry your hands in less than 15 seconds.  To achieve the low wattage usage, the dryer uses only the heat from the blower motor, so it has no heating element.  Not only does this technology save resources but it reduces installation cost and allows the dryer to be installed in places that it could not be installed because of the wattage usage.  The low wattage allows up to 3 of these dryers to be installed on one circuit.  This reduces installation time (most electricians charge by the hour) and can cut the number of new circuits needed by 1/3.  In some cases, normal wattage hand dryers could not be installed because of a lack of power in the building.  This dryer uses only 540 watts so it can be install on an existing circuit with other devices as long as the total power usage does not exceed the allowable power of that circuit (check with your electrician for details).

Hand Dryer Technology in Use

Listed blow are some of the hand dryers that use the hand dryer technology we have described.

Saniflow - Dualflow Hand Dryer
 - Elegant New Design
 - Dry Time: 10 - 15 seconds
 - Simply place hands (no hand movement) into the top of the hand dryer
 - No Heating Element
 - Uses Microban
® antibacterial protection
 -  Low Noise Level - should be 70 dB at a distance of 79’’

American Dryer - eXtremeAir Hand Dryer EXT
 - Dry Time: 12 - 15 seconds
 - Uses only 540 watts of power
 - No Heating Element
 - No Dedicated Line Required
 - Connect up to 3 Dyers on One Line
 - Greenspec® Listed
 - Helps facilities qualify for LEED-NC, LEED-EB and LEED-CI Credits
 - ABS Plastic Cover can withstand the weight of a full size truck.

Saniflow - Speedflow Hand Dryer
 - 10-15 Second Drying Time
 - ADA Compliant Surface Mounted Hand Dryer
 - Surface mounted and ADA (ADAAG) Compliant
 - Universal Voltage (Auto Voltage Sensing)
 - 110-120 V, 208 V, 220-240 V  - 50/60Hz
 - Variable speed motor
 - Greenspec® Listed

American Dryer - Global GX Hand Dryer
 - 63 db Quietest Hand Dryer made in the USA

World Dryer - SMARTdri™ Hand Dryer
 - 3-Speed motor control - Low, Medium, and High
 - ON/OFF heater options
 - Use 400 watts with motor on low and heater off

 
     
 

Email, Print, Bookmark, or Share

 

Buy the fastest hand dryers online.

  Rugged and Dependable, Buy NOW!  
   
   
 

Save money online now!

 
   
     
 

Site Map   Affiliate Program   Resources

© Copyright 2009-2011 ElectricHandDryers.com All Right Reserved